YUEQING FEEO ELECTRIC CO.,LTD
太阳能应用一站式解决方案。
Add to Cart
| Parameters | Standard Type Voltage | |
| 12VDC | 24VDC | |
| Work voltage | 9~16 | 18~32 |
| Max voltage | 16 | 32 |
| Action voltage | ≤9 | ≤18 |
| Release voltage | ≥1 | ≥2 |
| Coil Resistance | 25 | 94 |
| Min start current | 0.48A | 0.26A |
| Transient surge current | - | - |
| Average holding current | 0.48A | 0.26A |
| steady state time | 5.8W | 6W |
| Actuation time | ≤50ms | ≤50ms |
| Release time | ≤10ms | ≤10ms |
| Bounce time | ≤5 | ≤5 |
Parameters
| Contact form | 1H | Leading-out | M8 internal thread |
| Contact resistance | 0.2 mΩ(200A) | Rated load voltage | 12~900VDC |
| Maxmum switching current | 2000A 320VDC ( over 1 times) | Maximum Switching power | 640KW |
| Rated load current | 200A | Rated Electric life | 10000 (times) |
| Min load | 1A12VDC | Standards for electric current (10mm2 line0 | 200A |
| short time overload current | 320A 5min, 400A 2min 500A 30s | ||
Conditions of usage
| Operate temperature | -40℃~85℃ |
| Operating Humidity | 5%~95%RH |
| IP Grade | IP67 |
| Dimension (W*H*D) | 80*64.2*74 |
| Weight (g) | Q: 460g |
A DC contactor refers to a contactor whose iron core is DC controlled, and its load can be either DC or AC. The iron core of the DC contactor is different from the AC contactor. It has no eddy current, so it is generally made of mild steel or industrial pure iron to make a round shape. Since the attracting coil of the DC contactor is energized with DC, there is no impulsive starting current, and there is no violent impact on the iron core. Therefore, it has a long life and is suitable for frequent start and stop occasions. The selection of AC and DC contactors can be found in the electrical product catalog according to the working voltage and current of the line.
